Samsung

Samsung Washing Machine Error Codes:

1. OE – Drainage Error – The washer cannot drain properly. This could be due to a clogged hose, pump, or filter.
2. 3E – Motor Error – There’s an issue with the washing machine motor, possibly due to a connection problem or malfunction.
3. HE – Heater Error – The washer is unable to heat water to the desired temperature.
4. LE – Overload Error – The washing machine is overloaded with laundry or there’s an issue with the motor.
5. UE – Unbalanced Load – The load is unbalanced and the washer cannot proceed with the spin cycle.
6. E1 – Water Supply Error – The washer is not filling with water, possibly due to a blocked inlet valve, filter, or hose.
7. E2 – Water Drainage Error – The washer cannot drain water, usually due to a blocked pump or drain hose.
8. SUD – Excessive Soap Error – Too much detergent has been used, which can create excess suds.
9. dC – Door Lock Error – The door is not locking or unlocking properly.
10. tE – Temperature Sensor Error – There’s an issue with the temperature sensor, which may affect wash performance.

Samsung Refrigerator Error Codes:

1. 5E – Defrosting Error – The refrigerator’s defrost system is malfunctioning.
2. DE – Door Open Error – The refrigerator door has been left open too long, and the appliance has detected a temperature rise.
3. OF – Overheating – The refrigerator’s internal components, like the compressor, are overheating.
4. FC – Freezer Compartment Error – The freezer temperature is too high, which may be due to a blocked vent or malfunctioning compressor.
5. Er – Refrigerator Temperature Error – The temperature sensor in the refrigerator is malfunctioning or not detecting the correct temperature.
6. E1 – Fridge Temperature Sensor Error – There’s an issue with the fridge’s temperature sensor.
7. E2 – Freezer Temperature Sensor Error – The freezer’s temperature sensor is not working correctly.
8. HR – High Temperature Warning – The refrigerator is overheating, often due to a blocked vent or overstuffed shelves.
9. CO – Compressor Error – The refrigerator’s compressor is malfunctioning or not starting.

Samsung Dryer Error Codes:

1. dE – Door Error – The dryer door is not properly closed or locked.
2. HE – Heating Error – The dryer is not heating up, likely due to a faulty heating element or thermostat.
3. 4C – Water Drainage Error – For ventless dryers, the drainage system is blocked or clogged.
4. SUD – Excessive Detergent Error – The washer cycle in the combo unit was overloaded with detergent, causing excessive suds.
5. tE – Thermistor Error – The temperature sensor in the dryer is malfunctioning.
6. e3 – Overheating Error – The dryer has overheated, which could be due to a blocked vent or faulty thermostat.
7. bE – Button Error – The buttons or touchpad on the dryer are not working properly.

Samsung Microwave Error Codes:

1. Se – Touchpad or Keypad Error – The touchpad or keypad is not responding or has a malfunction.
2. E1 – Internal Error – There’s an internal issue, possibly with the control board.
3. F1 – Microwave Failure – The microwave’s main board is malfunctioning or not functioning properly.
4. F2 – Microwave Relay Error – The microwave relay is not operating as expected.
5. E3 – Humidity Sensor Error – The microwave’s humidity sensor is malfunctioning.
6. F3 – Magnetron Failure – The microwave’s magnetron is faulty, which may prevent the microwave from heating.

Samsung Dishwasher Error Codes:

1. 3E – Motor Error – There’s a problem with the dishwasher’s motor, possibly due to a blocked pump or electrical fault.
2. 4E – Water Supply Error – The dishwasher is not filling with water, possibly due to a clogged water inlet valve or filter.
3. 5E – Drainage Error – The dishwasher cannot drain properly, usually due to a clogged pump or drain hose.
4. IE – Water Inlet Error – The dishwasher is not receiving water or there is an issue with the inlet valve.
5. LE – Leakage Error – The dishwasher has detected a leak, which could be caused by a faulty seal, hose, or pump.
6. OE – Drainage Error – The dishwasher is unable to drain water properly.
7. HE – Heating Element Error – The dishwasher is not heating water properly, likely due to a malfunctioning heating element or thermostat.

Samsung Air Conditioner Error Codes:

1. E1 – Indoor Temperature Sensor Error – There’s an issue with the indoor temperature sensor.
2. E2 – Outdoor Temperature Sensor Error – There’s an issue with the outdoor temperature sensor.
3. E3 – Frozen Coil Error – The coil is frozen, which may be due to low refrigerant or a blocked air filter.
4. E4 – Fan Error – The fan motor is not working properly, preventing proper airflow.
5. E5 – Communication Error – The indoor and outdoor units are not communicating properly.
6. E6 – Inverter Error – The inverter in the air conditioner is malfunctioning.